12-40.5kV 高壓開關柜通用技術規范
聲明：您必須遵守我們的協議，如果您下載了該資源行為將被視為對《電天下賬號管理規范》全部內容的認可，本網站資源來自原創，僅供用于學習和交流，請勿用于商業用途。如有侵權、不妥之處，請舉報本資源，我們將及時審核處理！
12-40.5kV 高壓開關柜通用技術規范
12-40.5kV 高壓開關柜通用技術規范
文本預覽
12kV～40.5kV高壓開關柜通用技術規范
國家電網公司物資采購標準
（開關柜（箱）卷 高壓開關柜冊）
12-40.5kV 高壓開關柜
通用技術規范
（編號：1016001-0000-00）
國 家 電 網 公 司
二〇一一年二月國家電網公司物資采購標準（2009年版）
10kV一次設備卷（第二批） 高壓開關柜冊
本規范對應的專用技術規范目錄
序號 名 稱 編 號
1 12kV/1250A?25kA真空開關高壓開關柜專用技術規范 1016001?0010?01
2 12kV/2500A?25kA真空開關高壓開關柜專用技術規范 1016001?0010?02
3 12kV/1250A?31.5kA真空開關高壓開關柜專用技術規范 1016001?0010?03
4 12kV/2000A?31.5kA真空開關高壓開關柜專用技術規范 1016001?0010?04
5 12kV/3150A?31.5kA真空開關高壓開關柜專用技術規范 1016001?0010?05
6 12kV/4000A?40kA真空開關高壓開關柜專用技術規范 1016001?0010?0612kV～40.5kV高壓開關柜通用技術規范
高壓開關柜標準技術規范使用說明
1. 本技術規范分為通用部分、專用部分。
2. 項目單位根據需求選擇所需設備的技術規范，本技術規范通用部分條款及專用部分固化的參數原
則上不能更改。
3. 項目單位應按實際要求填寫“項目需求部分”。如確實需要改動以下部分，項目單位應填寫專用
部分項目單位技術偏差表（見表 7）并加蓋該網、省公司物資部（招投標管理中心）公章，與輔助說明
文件隨招標計劃一起提交至招標文件審查會：
1） 改動通用部分條款及專用部分固化的參數；
2） 項目單位要求值超出標準技術參數值；
3） 需要修正污穢、溫度、海拔等條件。
經標書審查會同意后，對專用部分的修改形成項目單位技術偏差表（見表7），放入專用部分中，隨
招標文件同時發出并視為有效，否則將視為無差異。
4. 對擴建工程，項目單位應在專用部分提出與原工程相適應的一次、二次及土建的接口要求。
5. 技術規范的頁面、標題、標準參數值等均為統一格式，不得隨意更改。
6. 投標人逐項響應技術規范專用部分中標準技術參數表、項目需求部分和投標人響應部分相應內容。
填寫投標人響應部分，應嚴格按招標文件技術規范專用部分的“招標人要求值”一欄填寫相應的招標文
件投標人響應部分的表格。投標人填寫技術參數和性能要求響應表時，如有偏差，除填寫投標人技術偏
差表（見表8）外，必要時應提供相應試驗報告。國家電網公司物資采購標準（2009年版）
10kV一次設備卷（第二批） 高壓開關柜冊
目 次
高壓開關柜標準技術規范使用說明 ··········································································································· 353
1 總則 ······················································································································································· 355
1.1 一般規定 ··········································································································································· 355
1.2 投標人應提供的資格文件 ····················································································································· 355
1.3 適用范圍 ··········································································································································· 355
1.4 對設計圖紙、說明書和試驗報告的要求 ································································································· 356
1.5 標準和規范 ········································································································································ 358
1.6 投標人必須提交的技術參數和信息········································································································ 359
1.7 備品備件 ··········································································································································· 359
1.8 專用工具與儀器儀表 ··························································································································· 359
1.9 安裝、調試、性能試驗、試運行和驗收 ································································································· 359
2 結構要求 ··············································································································································· 359
2.1 開關柜技術參數 ·································································································································· 359
2.2 通用要求 ··········································································································································· 359
2.3 斷路器 ··············································································································································· 362
2.4 隔離開關（若有） ······························································································································ 363
2.5 接地開關 ··········································································································································· 363
2.6 電流互感器 ········································································································································ 363
2.7 電壓互感器 ········································································································································ 363
2.8 避雷器 ··············································································································································· 363
2.9 站用變壓器 ········································································································································ 363
2.10 母線 ················································································································································ 363
3 試驗 ······················································································································································· 363
3.1 型式試驗 ··········································································································································· 363
3.2 出廠試驗 ··········································································································································· 364
3.3 現場交接試驗 ····································································································································· 364
4 技術服務、工廠檢驗和監造 ················································································································· 364
4.1 技術服務 ··········································································································································· 364
4.2 工廠檢驗和監造 ·································································································································· 365
5 一、二次及土建接口要求 ···················································································································· 365
5.1 40.5kV開關柜要求 ······························································································································ 365
5.2 24kV開關柜 ······································································································································· 372
5.3 12kV開關柜 ······································································································································· 382
6 外觀要求 ··············································································································································· 39212kV～40.5kV高壓開關柜通用技術規范
1 總則
1.1 一般規定
1.1.1 投標人應具備招標公告所要求的資質，具體資質要求詳見招標文件的商務部分。
1.1.2 投標人須仔細閱讀包括本技術規范（通用部分和專用部分）在內的招標文件闡述的全部條款。
投標人提供的交流金屬封閉開關設備（以下簡稱開關柜）應符合招標文件所規定的要求。
1.1.3 本技術規范提出了對開關柜的技術參數、性能、結構、試驗等方面的技術要求。
1.1.4 本招標文件提出的是最低限度的技術要求，并未對一切技術細節作出規定，也未充分引述有關
標準和規范的條文，投標人應提供符合本技術規范引用標準的最新版本和本招標文件技術要求的全新產
品，如果所引用的標準之間不一致或本招標文件所使用的標準如與投標人所執行的標準不一致時，按要
求較高的標準執行。
1.1.5 如果投標人沒有以書面形式對本技術規范的條文提出差異，則意味著投標人提供的設備完全符
合本招標文件的要求。如有與本招標文件要求不一致的地方，必須逐項在項目單位技術差異表（見表7）
中列出。
1.1.6 本技術規范將作為訂貨合同的附件，與合同具有同等的法律效力。本技術規范未盡事宜，由合
同簽約雙方在合同談判時協商確定。
1.1.7 本技術規范中涉及有關商務方面的內容，如與招標文件的商務部分有矛盾時，以商務部分為準。
1.1.8 本技術規范中通用部分各條款如與技術規范專用部分有沖突，以專用部分為準。
1.2 投標人應提供的資格文件
投標人在投標文件中應提供下列有關資格文件，否則視為非響應性投標。
1.2.1 投標人或制造商投標產品的銷售記錄（按技術規范專用部分投標產品的銷售及運行業績表提供）
及相應的最終用戶的使用情況證明。
1.2.2 投標人或制造商應提供權威機關頒發的ISO 9000系列的認證書或等同的質量保證體系認證證書。
1.2.3 投標人或制造商應提供履行合同所需的技術和主要設備等生產能力的文件資料。
1.2.4 投標人或制造商應提供履行合同設備維護保養、修理及其他服務義務的文件。
1.2.5 投標人或制造商應提供投標設備產品全部有效的型式試驗報告。
1.2.6 投標人或制造商應提供一份詳細的投標產品中重要外購或配套部件供應商清單及檢驗報告。
1.2.7 投標人或制造商應提供投標產品中進口關鍵元件供應商的供貨承諾函。
1.2.8 投標人或制造商應提供投標產品中組部件的供應商及原產地（按技術規范專用部分3.4的格式提供）。
1.3 適用范圍
國家電網公司物資采購標準
（開關柜（箱）卷 高壓開關柜冊）
12-40.5kV 高壓開關柜
通用技術規范
（編號：1016001-0000-00）
國 家 電 網 公 司
二〇一一年二月國家電網公司物資采購標準（2009年版）
10kV一次設備卷（第二批） 高壓開關柜冊
本規范對應的專用技術規范目錄
序號 名 稱 編 號
1 12kV/1250A?25kA真空開關高壓開關柜專用技術規范 1016001?0010?01
2 12kV/2500A?25kA真空開關高壓開關柜專用技術規范 1016001?0010?02
3 12kV/1250A?31.5kA真空開關高壓開關柜專用技術規范 1016001?0010?03
4 12kV/2000A?31.5kA真空開關高壓開關柜專用技術規范 1016001?0010?04
5 12kV/3150A?31.5kA真空開關高壓開關柜專用技術規范 1016001?0010?05
6 12kV/4000A?40kA真空開關高壓開關柜專用技術規范 1016001?0010?0612kV～40.5kV高壓開關柜通用技術規范
高壓開關柜標準技術規范使用說明
1. 本技術規范分為通用部分、專用部分。
2. 項目單位根據需求選擇所需設備的技術規范，本技術規范通用部分條款及專用部分固化的參數原
則上不能更改。
3. 項目單位應按實際要求填寫“項目需求部分”。如確實需要改動以下部分，項目單位應填寫專用
部分項目單位技術偏差表（見表 7）并加蓋該網、省公司物資部（招投標管理中心）公章，與輔助說明
文件隨招標計劃一起提交至招標文件審查會：
1） 改動通用部分條款及專用部分固化的參數；
2） 項目單位要求值超出標準技術參數值；
3） 需要修正污穢、溫度、海拔等條件。
經標書審查會同意后，對專用部分的修改形成項目單位技術偏差表（見表7），放入專用部分中，隨
招標文件同時發出并視為有效，否則將視為無差異。
4. 對擴建工程，項目單位應在專用部分提出與原工程相適應的一次、二次及土建的接口要求。
5. 技術規范的頁面、標題、標準參數值等均為統一格式，不得隨意更改。
6. 投標人逐項響應技術規范專用部分中標準技術參數表、項目需求部分和投標人響應部分相應內容。
填寫投標人響應部分，應嚴格按招標文件技術規范專用部分的“招標人要求值”一欄填寫相應的招標文
件投標人響應部分的表格。投標人填寫技術參數和性能要求響應表時，如有偏差，除填寫投標人技術偏
差表（見表8）外，必要時應提供相應試驗報告。國家電網公司物資采購標準（2009年版）
10kV一次設備卷（第二批） 高壓開關柜冊
目 次
高壓開關柜標準技術規范使用說明 ··········································································································· 353
1 總則 ······················································································································································· 355
1.1 一般規定 ··········································································································································· 355
1.2 投標人應提供的資格文件 ····················································································································· 355
1.3 適用范圍 ··········································································································································· 355
1.4 對設計圖紙、說明書和試驗報告的要求 ································································································· 356
1.5 標準和規范 ········································································································································ 358
1.6 投標人必須提交的技術參數和信息········································································································ 359
1.7 備品備件 ··········································································································································· 359
1.8 專用工具與儀器儀表 ··························································································································· 359
1.9 安裝、調試、性能試驗、試運行和驗收 ································································································· 359
2 結構要求 ··············································································································································· 359
2.1 開關柜技術參數 ·································································································································· 359
2.2 通用要求 ··········································································································································· 359
2.3 斷路器 ··············································································································································· 362
2.4 隔離開關（若有） ······························································································································ 363
2.5 接地開關 ··········································································································································· 363
2.6 電流互感器 ········································································································································ 363
2.7 電壓互感器 ········································································································································ 363
2.8 避雷器 ··············································································································································· 363
2.9 站用變壓器 ········································································································································ 363
2.10 母線 ················································································································································ 363
3 試驗 ······················································································································································· 363
3.1 型式試驗 ··········································································································································· 363
3.2 出廠試驗 ··········································································································································· 364
3.3 現場交接試驗 ····································································································································· 364
4 技術服務、工廠檢驗和監造 ················································································································· 364
4.1 技術服務 ··········································································································································· 364
4.2 工廠檢驗和監造 ·································································································································· 365
5 一、二次及土建接口要求 ···················································································································· 365
5.1 40.5kV開關柜要求 ······························································································································ 365
5.2 24kV開關柜 ······································································································································· 372
5.3 12kV開關柜 ······································································································································· 382
6 外觀要求 ··············································································································································· 39212kV～40.5kV高壓開關柜通用技術規范
1 總則
1.1 一般規定
1.1.1 投標人應具備招標公告所要求的資質，具體資質要求詳見招標文件的商務部分。
1.1.2 投標人須仔細閱讀包括本技術規范（通用部分和專用部分）在內的招標文件闡述的全部條款。
投標人提供的交流金屬封閉開關設備（以下簡稱開關柜）應符合招標文件所規定的要求。
1.1.3 本技術規范提出了對開關柜的技術參數、性能、結構、試驗等方面的技術要求。
1.1.4 本招標文件提出的是最低限度的技術要求，并未對一切技術細節作出規定，也未充分引述有關
標準和規范的條文，投標人應提供符合本技術規范引用標準的最新版本和本招標文件技術要求的全新產
品，如果所引用的標準之間不一致或本招標文件所使用的標準如與投標人所執行的標準不一致時，按要
求較高的標準執行。
1.1.5 如果投標人沒有以書面形式對本技術規范的條文提出差異，則意味著投標人提供的設備完全符
合本招標文件的要求。如有與本招標文件要求不一致的地方，必須逐項在項目單位技術差異表（見表7）
中列出。
1.1.6 本技術規范將作為訂貨合同的附件，與合同具有同等的法律效力。本技術規范未盡事宜，由合
同簽約雙方在合同談判時協商確定。
1.1.7 本技術規范中涉及有關商務方面的內容，如與招標文件的商務部分有矛盾時，以商務部分為準。
1.1.8 本技術規范中通用部分各條款如與技術規范專用部分有沖突，以專用部分為準。
1.2 投標人應提供的資格文件
投標人在投標文件中應提供下列有關資格文件，否則視為非響應性投標。
1.2.1 投標人或制造商投標產品的銷售記錄（按技術規范專用部分投標產品的銷售及運行業績表提供）
及相應的最終用戶的使用情況證明。
1.2.2 投標人或制造商應提供權威機關頒發的ISO 9000系列的認證書或等同的質量保證體系認證證書。
1.2.3 投標人或制造商應提供履行合同所需的技術和主要設備等生產能力的文件資料。
1.2.4 投標人或制造商應提供履行合同設備維護保養、修理及其他服務義務的文件。
1.2.5 投標人或制造商應提供投標設備產品全部有效的型式試驗報告。
1.2.6 投標人或制造商應提供一份詳細的投標產品中重要外購或配套部件供應商清單及檢驗報告。
1.2.7 投標人或制造商應提供投標產品中進口關鍵元件供應商的供貨承諾函。
1.2.8 投標人或制造商應提供投標產品中組部件的供應商及原產地（按技術規范專用部分3.4的格式提供）。
1.3 適用范圍
